Follow Me on Pinterest Follow Me on Youtube Follow Me on Instagram Follow Me on Linkedin Australian Top 100 Blogs
Showing posts with label #diy. Show all posts
Showing posts with label #diy. Show all posts

Saturday, 13 August 2016

Going Back To My Roots

Going Back To My Roots

What does that mean? "Going back to my roots" From a young age my parents would buy us a type of jerky, a South African jerky called Biltong. You normally use game type meat like Kudu which is a type of Buck or ostrich and even buffalo. I remember our friends parents making it after they would go hunting and it was amazing.  Kim and I decided to make some and kim did the instructions :)

After seeing a friend’s Biltong Box (think ventilated box, light bulb, computer fan and racks to dehydrate meat, fruit etc and you’re there), which conveniently stopped working forcing the friends to find another alternative (who would want to waste delicious seasoned meat) Dale thought to himself “I can do that at home using my oven that I have in my home”. So began another obsession, but I don’t think this will be a passing one.

I have known Dale and his family since maybe 2003 and basically from the start they exhibited a distinct, deep-seeded, strong love of meat. So I cannot even remember when I first tried it, but I’m fairly certain it was the thinly shaved type, not the slices or sticks (ah the variety). Biltong sold in Australia (unless you seek out less commercially produced biltong) seems to be very, very dry and tough enough to clean your dog’s teeth efficiently. We have purchased a Biltong fail in South Australia in a European grocery store in Hahndorf, holy s**t it was too spicy for Dale to eat and he ended up binning most of the strip of meat. Thank goodness I wasn’t able to eat it, although I was a little envious at first. Some of the sticks of biltong can tend to be dentist appointment makers too because they are so thin they just keep drying out fast.

These friends had to resort to using their oven to save the day, but their Biltong Box is salvageable, this being super convenient because it meant there was no need to buy any equipment. They used the hooks their Biltong Box came with and some paperclips. They had proper store bought biltong spice mix too. We didn’t, and you’ve gotta strike while the iron’s hot around our house so we improvised!

After reading lots of blog posts we found great variation in recipes for the spice mix and also very few people used the cheaters method of utilizing your oven (sacrilege to purists but we are not storing meat for 3+ days anywhere or waiting that long to taste the result of our hard work). I say hard work, but it isn’t really.


What you need and how to make Biltong magic happen

A convection oven with a light and a keep warm setting (our oven is gas and this didn’t work for us (too hot) so I just used the oven fan and light)

Hooks, paperclips, skewers, bulldog clips, pegs

Dripping tray to catch any moisture that comes from the meat

Packet of marinade mix

Worcestershire Sauce

Vinegar

Bicarbonate Soda

Chilli Flakes in the marinade and to coat prior to hanging



Dale found several online retailers who sell premixed marinade so we might try one of these next time, or not, we’ll see how this turns out. Plus most of the spice combinations suggested online seem to consist of salt, vinegar, sugar, coriander seeds, chilli flakes in various ratios. But like anything you can add whatever you like unless you’re a purist and have a specific expectation of what the flavor combination should be. Some butchers and specialty grocers sell some super fancy flavoured biltong. Posh.

As you can see in the pic, we cheated and just used a tasty sounding dry meat marinade from the supermarket. It smelt super smoky and sweet so it should be interesting. I added in Worcestershire sauce to make the powder into a lumpy paste. Then probably too much bicarb, we’ll see how it turns out but I think I should have added 1tsp. And vinegar to make the paste easier to spread onto the meat. We referred to several different instructions, some suggest vinegar rinse first, others say rinse in vinegar/water mix after marinating, others still say add it into the marinade. Some suggest using bicarb to inhibit mould others not. We just went for it like usual.


The important thing is to keep everything clean to reduce contamination of the meat because you aren’t using heat to kill all the bacteria, you’re relying on the salt, bicarb and vinegar to do this. How old school. Our packet mix did contain salt, as all such mixes tend to. Since we had such thin slices of meat I knew it wouldn’t take very long to dry them, and that we’d dry them thoroughly for storage or keep them a little less dehydrated for immediate eating.

Because we’re such noobs we went to a butcher and asked what they suggested we use as amateurs. The man who helped us was actually really nice, tattoos, missing teeth, a real meat lover. Anyway, he knew what we wanted to make and even showed us what other South African pro-Biltong makers bought (big chunks of meat, way too much for us should we fail). We settled on yearling topside schnitzel because most of the cutting was done and they were nice and thin so would dry really quickly.

Dale cut them along the grain to create 4cm by 1cm strips, then cut these in half to shorten them to fit our oven’s height. I then mixed the pieces of meat with the marinade and we left them in the fridge overnight.

 

Next morning I rinsed off the marinade with water, in hindsight I should have rinsed them in a water/vinegar mix to keep the bacteria at bay, dried the meat with paper toweling and then used skewers to hang the meat between the rungs of an oven rack placed at the highest position in the oven. For the last skewer I tossed the meat in chilli flakes before hanging them. As you can see I hung the meat in the oven making sure none of the pieces were touching. Also as mentioned earlier our lowest setting for keep warm was a little too warm, you want to dry not cook the meat. Our fan is super strong too so I’m hoping it’ll be efficient enough to dry the meat by the time Dale gets home. Because Rufus is such an asshat I put a chair in front of the oven so he couldn’t break in since the oven wasn’t hot enough to keep him at away.



So we wait 3+ hours, depending on how dry we want the meat to get. But the colour change is a fairly good guide, the meat goes a dark brown colour and the meat loses its’ juicy-squishyness. I’m sure Dale will be more than happy to taste test, Rufus too.

The house smells like a butcher.

I decided to light the oven (switching it to keep warm) every hour-or-so to pump a little warmth into it. But sticking my hand into the oven I feel like the light creates a teeny tiny bit of warmth.

Proper storage suggestions state that using anything other than paper doesn’t allow the meat to breathe and can lead to the meat being ruined. So we threw the biltong into some paper lunch bags and put these in the fridge.

The chilli biltong has a sweet chilli garlic taste and the other one is smoky with a heat that builds up slow. Dale is so happy with how they taste and is now looking where to buy venison or kangaroo but that will happen in the next month or so.

Will you give it a go?
Let me know what you think.
kind E-gards
Dale
 

Saturday, 30 July 2016

Not a Chippy

Not a Chippy
Another day has gone and again we achieved our goal of building some shelves in the next cupboard, for those who are not Australian and don't know what I mean by a chippy. A chippy is a carpenter and by no means are we carpenters but as usual we gave it our best... First thing was removing the old shelves.


Every shelf / cupboard is build differently in this house like in the kitchen they had glued and nailed the shelves in. In the bedroom they just used a lot of massive nails and in this room they used massive nails and toggle bolts. They used about 2 to 3 toggle bolts per shelf with nails and normally 1 toggle bolt can hold 10kgs. Unless they had planned to put 30kgs minimum it was completely over kill. It took nearly 2 hours to take them off the walls. You have to be carful when removing toggle bolts as they can put massive holes in the walls. 



 

Constructing them is the easy part as we went to the local hardware store with the measurements and got all the timber cut to size. Then all you have to do is put it in place and screw together. The project took a about 4 hours.


We installed rails to hang clothes off but the total cost for today was  just under $60 to do.
Have you ever tried to install shelves? Now we have to patch and paint.

Thanks for reading.
Kind E-gards
Dale



Monday, 25 July 2016

Life In The Fast Lane

Life In The Fast Lane

I have been at my job now for just over two months and it has been crazy, at my last job I had a couple of hours a day to do what I want. I would be able to do Youtube, Ebay and blog but now I have not much time even though I spend less time traveling I have struggled to find time to do this blog. Over the last few weekends we have been renovating again and replacing furniture to make the house look less cluttered. We have been looking for a T.V Unit for nearly 2 years and we finally found the right one. We got the unit from Holy Funk Furniture in Moorabbin. I also added an I.r Extender so I can turn the amp on and off with out opening the sliding doors.


 I hated the wall mount that the other T.V was so I replaced it with a $20 bracket that sits a few centimeters off the wall.


Last weekend we installed adjustable shelves into a  cupboard and readjusted the rail because whoever built it was a Muppet and it gives us more flexibility with storage.


I hated my modem sitting out in the open so I got a Cube frame and ran all my cables up the wall and into the cube. We need to print a picture off  to cover the front but it will look good when completed but we have not had time to print off the pic so hopefully we will do that in the next few days.



Those who know me know that I love doing Latte art but I have upgraded my coffee machine and sad to say no more art but I got my new machine at an amazing price and could not refuse it. The coffee is pretty close to a fully manual machine but makes coffee from start to finish in 60 seconds.


I hope the terrible weather passes so we can go take photos, until then we have two more cupboards to fix and a lot of painting.
What do you think?
Kind E-gards
Dale

Monday, 4 April 2016

April Already???

April Already???

I don't know where the last few months have gone because life has gotten hectic for me and my renovations and work has gotten crazy with unrealistic expectations which has not helped my mood or wanting to do anything else really.
We really hated our walk in wardrobe  so we jumped on the IKEA website and designed  a new wardrobe.

There is not much space in there to take photos afterward , but this is the design.


It took a full day to install both units but have now given us so much more space.

Our Easter weekend involved us doing the laundry and that included wall mounting cabinets plumbing as well. I had to replace the skirting board as it was not done correctly. I also helped the Mother-in law do renovations at their investment property including removing a massive tree


We need to get someone to tile the wall so that is still on the to-do list.


 I still can't believe i have done most of my resolutions. This weekend we had a baby shower to go to and catching up with friends. Next weekend should hopefully be quiet.

Kind regards
Dale

Saturday, 6 February 2016

D.I.Y Fridge Magnets

D.I.Y Fridge Magnets

We went to America a few years ago and we went to an amazing brewery in Long Island and they had these great fridge magnets so we bought some. I really wanted to make my own so over the last few months I collected random bottle tops.


I did not want them all the same and these are the ones I really liked.
Things you need. Glue gun with glue, felt, small coin and small magnets, I bought them off eBay and it was a couple of dollars for 10 of them.

Step one. Trace around the bottle top on the felt and cut it out


Step two. Glue felt to lid.


 Step three. Glue Magnet to Felt.


Step four. Cut another small piece of felt

Step five. Glue it on top. This protects the fridge from getting scratched and makes it easier to take the magnet off as well.



I love being creative.
Do you think you would make some.
Kind E-gards
Dale

Thursday, 7 January 2016

New Years Resolutions

New Years Resolutions

We all have resolutions and for whatever reasons whether it be for health, financial, or the heck of it kind of reasons. Like i have taken up cycling on our exercise bike and that's to loose weight and improve my breathing. We have now been in our house for 1.5 years and we hate the pantry as it was built badly and just annoying so part of our New Year Resolution was to fix it. For Christmas my parents gave us money as a present and we thought what better way to use the money.


So Saturday night I decided to do it and to have a good start to the resolutions. The pantry had three large, deep shelves so you did not know what was at the back and they had tiny shelves underneath so you could not see what was on it.  I thought demolition would take an hour or two hours max. I was wrong as whoever installed it glued it and went crazy with nails. It took about 5 hours of blood, sweat and swearing to remove it.  We finished removing it Sunday morning.


We had to patch up some of my new accidental holes then paint it. Yet again I thought would take a few hours to put together but I then found out the screws it suggested to use did not work so we had to go back to Bunnings and this was about our 4 trip (and many more to go). We finally had the shelves in late Monday night and then restocked it on Wednesday as Tuesday night we had plans.


We still need to do some basic rearranging but we are so much happier with the new panty.
Are you lucky like me and every time you do a reno something goes wrong too or it doesn't "fit" like it should?

Thanks for reading.
kind E-gards
Dale Stewart